- 积分
- 97
- 最后登录
- 1970-1-1
- 在线时间
- 小时
逍遥元-
分享点-
TA的每日心情 | 衰 2019-1-21 17:31 |
---|
签到天数: 67 天 连续签到: 1 天 [LV.6]经理
升级
  94%
|
飞行资源
插件名称: |
默认机自动着陆插件 |
支持平台: |
[FSX] |
插件出版公司: |
其他 |
需要硬盘空间: |
100M~1G |
安装方法: |
其他安装方法(贴内说明) |
本帖最后由 张杨晨曦 于 2017-7-5 19:10 编辑
安装说明:1.解压文件夹,复制相应机型的"autoland"文件夹,粘贴到FSX/Simobject/airplane/相应机型/panel文件夹中。
2.在panel文件夹中,修改相应机型的panel.cfg 文件。以默认A321为例,
详细如下:
用记事本方式打开,找到(属于 "main panel"下的) [Window00] 找到最后一个guage
然后添加gaugexx=autoland!A_AUTOFLARE, 0,0,0,0
如:
[Window00]
file_1024=737-800_panel_background.bmp
file_1024_night=737-800_panel_background_night.bmp
size_mm=1024
position=7
visible=1
ident=MAIN_PANEL.
gauge00=Airbus_A321!altimeter_backup, 676,505
gauge01=Airbus_A321!annunciator_panel_1, 24,357
gauge02=Airbus_A321!attitude_backup, 651,628
gauge03=Airbus_A321!autopilot, 677,346
gauge04=Airbus_A321!hsi_backup, 517,609
gauge05=Airbus_A321!ias_backup, 581,506 `
gauge06=Airbus_A321!pfd, 23,521,215,214
gauge07=Airbus_A321!mfd, 264,521,215,214'
gauge08=Airbus_A321!ecams, 788,521,215,214
gauge09=Airbus_A321!pfd_mfd_select_panel, 470,345"
gauge26=SimIcons1024!ECU Icon, 790, 745.
gauge27=SimIcons1024!Overhead Icon, 812, 745
gauge28=SimIcons1024!Kneeboard Icon, 834, 745
gauge29=SimIcons1024!ATC Icon, 856, 745gauge30=SimIcons1024!Map Icon, 878, 745
gauge31=SimIcons1024!GPS Icon, 900, 745
gauge32=SimIcons1024!Radio Icon, 922, 745
gauge33=SimIcons1024!Other Controls Icon, 944, 745
gauge34=SimIcons1024!Engine Instruments Icon, 966, 745
gauge35=SimIcons1024!Clock Icon, 988, 745
Fgauge36=n_number_plaque!n_number_plaque, 258,429,67,199
gauge37=autoland!A_AUTOFLARE, 0,0,0,0 (XX改成37)
将红色字段粘贴到gauge最后一行。XX改成上个guage数字加一位
保存~
然后起飞吧~说明:该功能只有在进入下滑道,激活APP灯之后才能发挥作用。手动降落不行。During ILS approaches, after establishing the usual settings (com frequency, course, approach active etc.) for an ILS approach
set your speed, arm speed brakes, auto brakes (if you want) and then wait till the aircraft touches down. You don't have to activate the gauge because it is active by default.(在完成常规设置(通话频率,磁航向,激活进近开关)之后,进入盲降期间,设置你的航速,减速板预位,自动刹车(如果你需要的话),你就等着飞机接地吧,自动接地是默认激活的,因此你不用干预。)
You will observe the nose going up slightly (at about 30 ft AGL) for a smooth touch down (the front landing gear following), the autothrust being disengaged (about 20-15 ft AGL),and at 50 knots the autopilot being disengaged.(你将观察到机鼻微微抬升(离地30ft时),进行平稳接地,接着在离地20-15ft断开自动油门,航速50节时断开自动油门)
ILS_CATII_AND_III_AUTOLAND_GAUGES.zip
(11.58 KB , 所需积分: 1 逍遥币)
如果您喜欢不要忘了评论下哦
|
|